Professionelles Autodiagnosetool Autel Maxisys MS919

Professional Car Diagnostic Tool Autel Maxisys MS919

What are the functions of the MaxiSys MS919 professional car diagnostic tool?

Autel MS919 professional car diagnostic tool has 36+ Service functions to meet your daily maintenance needs. Along with the increase of new vehicles, service functions are still growing.

• Oil Reset: Zero mileage or travel time after maintenance and start a new cycle.
• EPB: Reset: the brake pads after replacing the brake pads/brake pad sensor circuit/servo motor or when the brake pad indicator light is on.
• SAS calibration: After replacing the steering angle position sensor and steering system mechanical components, calibrate the steering angle to reset the steering position
• BMS: After replacing the battery or battery monitoring sensor, re-match the control module and motor sensor to detect the battery more accurately
• Throttle: Initialize the throttle actuator and adjust the learning value of the ECU to the initial state.
• ABS: Bleed air from the braking system to restore ABS braking sensitivity.
• More: Trans Adaptation, Battery Replacement, Zero Point Calibration, Weight Sensors Calibration, Seat Occupant Calibration, VGT Turbo Calibration, Injector Coding, ABS Module Initialization, Idle Relearn, Power Balance, Crankshaft Variation Position Learn, EVAP Test(leak down test), matchings, adaptations, etc.

Note: Service/special features are not available on all cars. Please send us VIN, the vehicle makes, model, year, and VIN to check compatibility before purchasing.

Counting Highlights of Autel MaxiSys MS919 professional car diagnostic tool:

• High-end Configurations: Designed with Android 7.0 OS, Qualcomm 660 Octa-coreProcessor, 9.7 inch TFT-LCD with 1536 x 2048 resolution, super 4GB Ram&128GB built-in memory, Dual Wi-Fi, 5MP & 16MP cameras, 15000mAh battery.
• Intelligent Diagnostics: Adopts scientific data cloud computing technology to match specific fault codes with the exact vehicle model, including TSB, DTC Analysis, Repair Assist, Repair Tips, and Relevant Repair Cases.
• ECU Programming: For Benz & BMW, Programming adaptive data to new modules and improving vehicle performance.
• ECU Online Coding: Coding and Module Replacement for Volkswagen / Skoda / Seat / Porsche / BMW and more cars
• 5-in-1 VCMI: Designed with the functions of multimeter, oscilloscope, waveform generator, and OBDII CAN Bus Check to ensure communication stability
• Topology Module: Check all fault codes in a tree at a glance.
• Bi-directional Control: Send command to ECU module and check corresponding actuator action.

MS919 Professional Car Diagnostic Tool Support ECU Programming for Benz & BMW, ECU Online Coding.

ECU Programming:

With a 5-in-1 VCMI PassThru programming interface device, Autel MS919 professional car diagnostic tool can compliant with D-PDU, SAE J2534 & RP1210 to update OEM software and replace the existing software/ firmware in ECU, fix ECU parameter loss, program new ECU and fixing software-controlled drivability issues and emission issues.

Note: Autel programming scanner is only available for Mercedes/ BMW, other brands are not supported.

ECU Coding & Online Coding:

Autel MS919 professional car diagnostic tool allows you to watch, learn, code, or even program the newly replaced ECUs, change preprogrammed options in the software, customize settings, unlock hidden features, disable annoying functions to improve vehicle performance, etc.

It is compatible with Volkswagen Skoda Seat Porsche BMW and other cars.

Here are some examples:

Change the chimes on their car, set how many times its one-touch signal flickers for one touch, remember settings for Start/Stop systems, activate cornering headlights with fog lights, deactivate some buzzing sounds, lower the level of the passenger-side mirror when reversing, activate “needle sweep” function when the ignition is on (only for some Volkswagen AG models), automatic door locking at a particular speed, set daytime running lights, Seatbelt warning sounds, Mirrors automatically folding and unfolding, Flashing the brake lights during emergency braking. Activating/deactivating daytime running lights, Changing the brightness of daytime running lights, Flashing the headlights when the alarm system is triggered, Dashboard coding, Displaying the real speed via GPS signal, Displaying the amount of fuel consumption at a given speed, Displaying the optimal gear changing time, Incoming call display, Warning signals coding.

Intelligent Diagnostics & 5in1 VCM1 Device

Intelligent Diagnostics is a specific fault code analysis function, with which you can access the most comprehensive and latest code-specific data, DTC analysis, repair assistance, repair tips, and relevant repair cases. It has been drawn from real-world shop repair orders and records and with input from experienced industry professionals.

1. Vehicle System and Detected DTC(s) – displays the name of the vehicle system and the detected DTC(s)
2. Technical Service Bulletin(TSB)– contains DTC-related recalls, TSB, and OEM campaigns.
3. DTC Analysis – provides repair assistance information related to the fault code.
4. Repair Assist – intelligently prioritizes DTCs and leads the user to the proper repair.
5. Component Measurement – provides detailed information and instructional guides on using the oscilloscope to test components for faults.
6. Relevant Cases – offers relevant fault-clearing cases for reference.

Multifunctional 5in1 MaxiFlash VCMI

With 5-in-1 VCMI, Autel MS919 professional car diagnostic tool will adopt 4 major technologies: large bandwidth, high sampling rate, deep storage, massive preset cases, and 2 major features: amplification and playback, and advanced triggering to improve the efficiency of solving complex issues.

The MaxiFlash VCMI device is designed with the functions of multimeter, oscilloscope, waveform generator, and OBDII CAN Bus Check. The parameters such as voltage, resistance, current, signal frequency, and voltage-time characteristic of the signal can be measured and the results are displayed on the tablet.

• Oscilloscope: it is a measuring instrument that shows how a signal graphically varies with time. Various signal activities can be displayed and monitored on a two-dimensional grid. It's easier to know the nature problems.
• Multimeter: The multimeter is a multi-function, multi-range measuring instrument.
• Waveform Generator: The Waveform Generator is used to test a sensor, an actuator, or an ECU without the need to replace them one by one to identify the fault. This is done by simulating signals of various sensors and ECUs and identifying hardware issues.
• CAN Bus Check: The CAN Bus Check can quickly determine whether the OBD pins are functioning correctly.

 

Topology Module Tree

• With Topology structure, Autel MaxiSys MS919 can show all vehicle modules with a color-coded topology structure communication network, all fault codes of each vehicle module, and the relationship between different modules can be viewed at a glance. You can select any module to display its DTCs and access the system to perform repairs step-by-step.
• Note: Please send vehicle make, model, year, #VIN, and the specific functions you need to check compatibility.

Bi-Directional Control & Support Newer Vehicles

MS919 professional car diagnostic tool can perform bi-directional/ active tests on vehicle systems, components, and so on. With bi-directional control, MS919 allows you to command signals to the corresponding actuator, based on response to locate fault codes.

Bi-directional Control does for you:

One click control to roll up/down the window

Turn on/ off the fuel pump

Turn on/ off cycling the a/c clutch

Assist with emission leak test

Autel has updated Autel MS919 software to meet customer needs and repair some software issues.

For Honda, Hyundai, Kia, Hyundai, Yueda Kia, Chrysler 2019-2021 new cars:

Autel MS919 adds 21 models in 2021, adds 12 systems, and upgrades the basic functions of all models from 2019 to 2021, such as version information, read/ clear codes, live data, action test, the maintenance light reset, electronic parking brake, Maintenance functions such as throttle matching, Brake Bleed, tire pressure detection, steering angle, and mileage reading. It also Adds 100+ special functions, including CVVD Intake Adaptation, BLE Learning function, and High Voltage Battery Diagnosis System, not limited to these functions.

Note: You can send year, make, model, and VIN and you want to perform functions to check compatibility before you purchase.

Professional Car Diagnostic Tool Specifications

Operating System	Android 10.0
Processor	Qualcomm 660 Octa-core Processor (2.2GHzQuad-coreA73 +1.8GHzQuad-core A53)
Memory	4GB RAM & 128GB Onboard Memory
Display	9.7 inch TFT-LCD with 1536 x 2048 resolution & capacitive touchscreen
Connectivity	Dual Wi-Fi (802.11 a/b/g/n/ac 2x2 MIMO) BT V5.0 + BR/EDR GPS USB 2.0 (2 USB TYPE-A ports and a Mini USB port) HDMI 2.0 SD Card (Support up to 256GB)
Camera (rear)	Rear: 16 Megapixel, Autofocus with Flashlight Front: 16 Megapixel
Sensors	Gravity Accelerometer, Ambient Light Sensor (ALS)
Audio Input/Output	Microphone Dual Speakers 3-Band 3.5 mm stereo/standard headset jack
Power and Battery	15000mAh 3.8V lithium-polymer battery Charging via 12V AC/DC power supply with the temperature between 0°C and 45°C
Input Voltage	12V/1.3A Adapter
Operating Temperature	0 to 50°C (32 to 122°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Dimensions (WxHxD)	304.4 mm (11.98") x 227.8 mm (8.97") x 42.5 mm (1.67")
Weight	1.66kg (3.66lb.)
Protocols	DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can(GMLAN), ISO-11897-2, ISO-11897-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2)